top of page
  • Writer's pictureHarsh

Seamless Luxury: How to Install LushWash's Smart Toilet Seat

Updated: May 21


A blue toilet with a left-pointing blue arrow.

Transforming your bathroom into a realm of luxury and hygiene is now easier than ever, thanks to LushWash's innovative Bidet Toilet Seat. This advanced technology not only elevates your personal hygiene experience but also adds a touch of elegance to your bathroom. In this step-by-step guide, we will walk you through the hassle-free process of installing LushWash's Bidet Toilet Seat, so you can enjoy the ultimate comfort and convenience right in your home.

Step 1: Gather Your Tools and Materials Before you begin, make sure you have the following tools and materials at hand:

  • LushWash's Bidet Toilet Seat (with all necessary components)

  • Screwdriver

  • Adjustable wrench

  • Measuring tape

  • Pencil

  • Level

  • Bucket or towels (for any potential water spillage)


Step 2: Prepare Your Toilet Start by shutting off the water supply to your toilet. You'll typically find a shut-off valve located on the wall or floor behind the toilet. Turn it clockwise to stop the water flow. Then, flush the toilet to empty the tank and bowl completely.

Step 3: Remove Your Existing Toilet Seat Use a screwdriver to remove the nuts and bolts that secure your existing toilet seat. Keep these components, as you may need them later. Lift the old seat and cover off the toilet bowl and set them aside.

Step 4: Align the Mounting Plate Position LushWash's mounting plate over the mounting holes on your toilet bowl. Make sure it's centered and level. Use a pencil to mark the mounting hole locations on the toilet bowl for reference.

Step 5: Attach the Mounting Bracket With the mounting plate in place, attach LushWash's mounting bracket to the plate using the provided bolts and nuts. Tighten them securely using an adjustable wrench.

Step 6: Slide in the Bidet Seat Slide LushWash's Bidet Toilet Seat onto the mounting bracket until you hear a click or feel it securely lock into place. This mechanism ensures a stable and wobble-free installation.

Step 7: Connect the Water Supply Locate the water supply hose provided with your LushWash Bidet Seat. Connect one end to the seat's water inlet, and the other end to the shut-off valve on the wall or floor. Tighten the connections by hand and then give them a gentle turn with an adjustable wrench to ensure they are secure.

Step 8: Turn on the Water Supply Once the water supply is connected, slowly turn the shut-off valve counterclockwise to restore the water flow to the toilet.

Step 9: Check for Leaks Check for any water leaks around the connections and the bidet seat. If you notice any leaks, gently tighten the connections as needed until they are sealed.

Step 10: Set Your Preferences Your LushWash Bidet Toilet Seat is now installed and ready for use. You can customize your cleansing experience by adjusting water temperature, pressure, nozzle position, and more using the seat's control panel or remote control.

Elevate Your Bathroom Experience With LushWash's Bidet Toilet Seat installed, you've taken a significant step toward a more luxurious, comfortable, and hygienic bathroom experience. Enjoy the convenience and elegance of advanced bidet technology right in your own home. LushWash makes installation a breeze, so you can start reaping the benefits of a cleaner and more comfortable lifestyle without delay.



26 views0 comments

Kommentare


bottom of page